PLASTIC SPIRAL BINDING

Why Plastic Spiral Binding?

Very sturdy, very durable document binding - the stuff cook books are made of!
No sharp edges, safe even for children.
This binding allows a document to be opened 360 degrees securely.
Available up to 35mm. in diameter and 3 feet long.
Mailing with this type of binding is no problem - practically indestructible.
30 colours to choose from.
 

PC2000 Manual Punch & Electric Inserter (Plastic Coils)

11" punching edge - Open ended for larger books
Easily punches 12 sheets (20 lbs. bond)
Shipped with choice of available punch patterns.
Weight: 34lbs.Lightweight and portable.
Dimensions: 15 1/2" high X 27" wide X 19 1/2" long.
Capable of Binding 3/16” to 1¼” (5mm - 30mm) Diameter Coil.
110V /5A/ 60Hz Electronics (230V / 50Hz available)
One- year warranty.
This is a great unit for lower volume applications e.g. office use, schools, smaller printers.]

Punch Patterns for PC 2000 ONLY

SW 4000 Electric punch & bind Combination.

This unit can punch any standard hole pattern including plastic combs, wire loop, plastic coils, Velobind, 3 hole drill

loose-leaf, offset duplicator press plates/clean-up sheets.

Easily disengage any punch pin. Die is removed in seconds .

Die removes with no tools required, nothing to take apart.

The OD 4000 punch comes with an auto reversing feature that prevents jams.

Punching capacity of 17 sheets of 20lb. bond.
Paper capacity 11" or A4.
Use side guide or foot pedal switch activation. 60 cycles/min.
Quite power on demand operation.

SW 4000 Specifications

ELECTRICAL REQUIRMENTS:120 volts, 2.5 amps. ,60 Hz

WEIGHT: Machine 37 lbs., Shipping 44.2 lbs.

DIMENSIONS: 6 " high X 14 3/4 " wide X 14 1/2 " deep.

The SW4000 comes with a 1 year limited warranty on both machine & die.

SW 4012 Electric Punch.

The OD-4012 accepts 7 HD style interchangeable binding modules
for flexible space saving and punch & bind combinations. It has the E-Z Change Die System, and comes with both a manual and an auto-reversing feature that prevents jams. The OD 4012 uses 11" (A4) size dies with open sides for wider sheet punching capability. OD 4800 & OD 4000 dies and modules work on the OD 4012, adding additional useful life to existing equipment. It has easy "Paper to Pin" sight alignment, for balanced hole to edge margins on odd-sized applications and features our unique Punch Registration System that assures accurate margins on an 11" (A4) sheet regardless of which die is used. Punching capacity rated at 25 sheets of 20 lb bond, equal to 50 pages front and back on any hole pattern.

OD 4012 - MACHINE SPECIFICATIONS

ELECTRICAL REQUIREMENTS: 115 volts, 4 amps, 60 Hz

WEIGHT: Machine - 48 lbs., Shipping 57.7 lbs.

DIMENSIONS:6 1/2" high x 16" wide x 18" deep.

The SW 4012 comes with a 1 year limited warranty on both machine & die.

SW 7700 Ultima Heavy Duty Electric Punch.

Vertical or horizontal feed.

The HD-7700 Ultima is an exceptional Table Top Punch that has no equal. Combining the Rhin-O-Tuff patented Quick Change Die System with the following exciting new features:

• 14" ( 356mm ) open ended extra capacity die:
  Punch up to 55 sheets or 110 pages of 11 inch, 20 lb or 80gsm bond paper.
• U-View waste tray:
  Holds up to 150% more waste than any other table top punch & eliminates troublesome overfills.
• The Accu-Set Paper Stop:
  Set-up all hole placements easily & accurately, even on odd sized paper.
• Diagnostic Display Lights:
  Give indications of important machine conditions.
• Built in Automatic and Manual Reverse:
  Providing extra insurance to eliminate costly down time & expensive service calls due to overload jams.

With these new features plus all of the standard features you have come to expect. This Performance Design Punch will handle any size project, large or small.

SW 7700 MACHINE SPECIFICATIONS

ELECTRICAL REQUIRMENTS: 115 volts, 4 amps, 60 Hz

WEIGHT: Machine 96 lbs., Shipping 103 lbs.

DIMENSIONS: 8 1/2" high x 21" wide x 22 1/2" long.

Tthe HD-7700 comes with a 1 year limited warranty on both machine & die.

HD 4170 Coil Inserter Module (Plastic Coils)

The HD 4170 "Rhin-O-Roll" Coil Inserter Module has 12" dual powered adjustable rollers for easier more accurate coil insertion. It has gauges for book thickness and coil sizing. The HD 4170 can be used as a stand-alone production coil inserter or it can be attached on any OD or HD Series machine. All pitches and diameters can be inserted using it. The HD 4170 comes with a crimper pliers holder.

HD4170 MACHINE SPECIFICATIONS

ELECTRICAL REQUIRMENTS: 115 volts, 3 amps, 60 Hz

WEIGHT: Machine 29 lbs., Shipping 34.5 lbs.

DIMENSIONS: 5 " high x 17.5 " wide x 10 " long.

 
CI 3000 Electric coil inserter (Plastic Coils)

The CI 3000 provides electric coil inserting and features a patented Lexan Guide for easier insertion of all coil, particularly in books 9/16" thick and up. The unit will handle coil lengths from 12" to 36", providing you more flexibility for large jobs and calendars.

CI 3000 MACHINE SPECIFICATIONS

DIMENSIONS: 6 1/4" H X 22" W X 22" D.
ELECTRICAL: 120Volts, 1Amp, 60 Hz
WEIGHT: Machine 21 lbs. Shipping wt. 25 lbs.

 
OD 4300 Electric coil inserter (Plastic Coils)

The PC 4300 provides electric coil inserting and will attach to any of our power punches to provide you with a punch and bind combination unit. It can also be used together with the OD 3500 as a stand alone binding station. The unit will handle coil lengths from 12" to 36", providing you more flexibility for large jobs and calendars.

CI 3000 MACHINE SPECIFICATIONS

DIMENSIONS: 6" H X 8 1/2" W X 7" D.
ELECRICAL REQUIRMENTS: 120Volts, 1 Amp, 60 Hz
WEIGHT: Machine 17 lbs. Shipping wt. 20 lbs.

 
OD 3500 Binding station

The OD-3500 combo binding station allows you to do three types of binding on one small footprint: plastic coil, double loop wire or plastic comb. Essentially, three binding machines in one if used with different binding modules.

OD 3500 MACHINE SPECIFICATIONS

DIMENTIONS: 4 1/2" H X 14 3/4" H X 14"
WEIGHT: Machine 15lbs. Shipping wt. 18lbs.

 
 


The PC 4000 and 7000 series of punches feature our unique punching registration system that assures register of punch holes to the edges of an 11" sheet regardless of which punching die is inserted in the machine. You never have to move the side guide to get the holes centered on the sheet.